The Wera Kraftform Kompakt SH 3 Toolkit is a general purpose, contractors tool set that covers most on site needs supplied in a handy carry case. The Wera 867/4 Z SB TX Bits from ITS are designed for Torx Screws. The tough-absorbing Wera bits (Z) prevent any premature breakage of the drive tip and are suitable for holders as per DIN ISO 1173-F 6.3. JOKER Combination Ratchet Wrench Ratcheting combination wrench with unique holding function, thanks to the replaceable metal plate in the jaw with its extra hard teeth, reducing the risk of dropping & slipping of nuts and bolts. Integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. Double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. Return angle of only 30° at the open end to avoid time consuming flipping of the wrench during fastening jobs, ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism, 80 teeth in all, enables flexibility in very confined working spaces. Specially forged geometry for high torque transfer and strength, high performance chrome molybdenum steel, nickel-chrome coating for high corrosion protection. 8000 A Zyklop Speed Ratchet with 1/4″ drive The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning